Датчик содержания растворенного кислорода в воде Memosens COS81E

Габаритные размеры

Diameter: 12 mm (0.47 inch)Shaft length: 120, 160, 220, 320 and 420 mm(4.7 , 6.3 , 8.7 , 12.6 and 16.5 inch)

Датчик температуры

Pt1000

Диапазон измерения

0.004 to 30 mg/l0.05 to 330 %SAT0.1 to 700 hPa

Дополнительные сертификаты

Дополнительные сертификаты

Конструкция

Optical system, stainless steel

Материал

Sensor shaft: Stainless steel 1.4435 (AISI 316L)Process seal: FKM (USP<87>, <88> Class VI and FDA)Process seal for Ex versions: FKM (not FDA-compliant)Seals/O-rings: EPDM, FFKM (USP<87>, <88> Class VI andFDA)Spot cap: Stainless steel 1.4435 (AISI 316L), titanium or hastelloySpot layer: Silicone (USP<87>, <88> Class VI and FDA)

Монтаж

Standard process connection Pg 13.5Installation in standard pH assemblies possible

Подключение

Inductive, digital connection head with Memosens 2.0 technology

Применение

• Oxygen control in fermenters, e.g. in the pharmaceutical or biotechnology sectors• Monitoring of explosive atmospheres with an oxygen concentration of ≥ 2% Vol• Quality control in the food industry

Принцип измерения

Principle of luminescence quenching

Рабочая температура

1 to 140 °C(32 to 284 °F)

Рабочее давление

0.02 to 13 bar abs(0 to 190 psi)

Сертификаты на взрывозащиту

With ATEX, IECEx, NEPSI, Japan and INMETRO approvals for use inhazardous areas Zone 0, Zone 1 and Zone 2 and furthermore Zone 20, Zone 21 and Zone 22 in dust hazardous areas.With CSA C/US approval for use inhazardous areas Class I Division 1 and furthermore Class II Division 1 in dust hazardous areas.

Степень защиты

IP68IP69

Характеристики

Hygienic, optical sensor for stable oxygen measurement over multiple sterilization cycles